Item no. 341

Waste water test kit APS Soft

Accessories DPG07, DPG02, LM06

The flexible waste water test set: Leak test of waste water pipes in building installations.

Durable

You can rely on high quality

Check waste water

Leak test of wastewater pipes

Testing a condensing boiler stack and inflating the test bladder with bellows; test bladder in the cleaning opening of a waste water pipe.

Technical details

Services

The APS Soft optimally complements your RAU measuring devices for testing waste water pipes and condensing boilers.
You can find all the advantages here:

Testing of wastewater pipes in accordance with DIN EN 1610 using the LC "air" method and a test pressure of 100 hPa
Mainly used for testing newly installed wastewater pipes in domestic installations
Test bladder for diameters 50-150 mm with pneumatic connection for the DPG07, DPG02 and LM06 TOUCH
3 shut-off bladders for pipe diameters 50, 100 and 50-150 mm
Bellows for inflating the test and shut-off bladders
Test time depending on the pipe diameter and selectable on the test device
Save measurement results, transfer data to a PC and print out logs incl. Diagram on DIN A4 - only with DPG07 TOUCH and LM06 TOUCH
Other possible applications: Leak testing of condensing stoves (chimney testing)

Scope of delivery

EAN GTIN
APS SOFT: 4262453340348

WPS FUNK

Useful accessories

Pressure pump up to 3 bar DPL

Air pressure pump for oil-free inflation up to 3 bar

USB charging cable for WPS radio with magnetic adapter

Item no. 73095

USB charging cable for WPS FUNK (new generation with magnetic plug and rotary switch for switching on and off since May 2024) Charging cable for WPS FUNK from 5/24 with USB (type A) to magnetic adapter

Cylindrical sealing plug – VF DN12, 3/8″

Item no. 233

Cylindrical rubber sealing plug (blue) d = 12.0 mm

for pipes DN12, 3/8″
Suitable up to max. 4 bar test pressure
The blue rubber is compressed by turning the wing nut, which closes the tube.
For sealing pipe openings

DN 100 shut-off bladder with extension hose

Item no. 76058S

Shut-off bladder DN 100 with extension hose (1 m) and ball valve with plug nipple NW 2.7 Loadable up to max. 0.4 bar

Shut-off bladder DN 50 with extension hose

Item no. 76059S

Shut-off bladder DN 50 with extension hose (1 m) and ball valve with plug nipple NW 2.7 Can be loaded up to max. 0.4 bar

Gutter Bracket Forming Pliers Stainless steel (RHBG VA)

Item no. 1379

Your advantages:

Sturdy gutter hooks
Saves a lot of time and energy
There is no need to transfer the crack line from the back to the front!
Stable support leg
Snap button for arbritization

The Gutter Bracket Forming Pliers RHGB from RAU helps craftsmen with the challenge of bending thick gutter hooks. Thanks to its innovative stainless steel construction, the RHBG is extremely strong and saves strength when bending. The long handles allow you to work with little effort thanks to the leverage effect. With the easily adjustable stop, you can achieve a consistent bending result (angle) with many gutter hooks to be bent. Another major advantage of working with the RHGB is that there is no need to transfer the crack line from the back to the front! It can be bent directly on the marked crack line. This enables faster work and saves time. Data: Suitable for gutter hooks with a thickness of up to 8 / 10 mm Weight: 3.92 kg Length x width x height: 78 x 31 x 25 cm Size of gutter hooks: 25 x 5 to 30 x 8 mm